General-tools-and-instruments CIH20DL Instrukcja Użytkownika Pobierz pdf (Strona 13)

Fig. 8. The Advanced Settings Menu

Normal Measuring

mode

Air Speed or Airflow

Volume mode

Air speed unit

Airflow

volume unit

Temperature unit

Enter area of

grille or register

Sampling time of

data log

Clear data

logging memory

Set current date

Set current time

Press and hold the MODE SET button for 3+ seconds to enter/exit

menu from/to normal measuring mode.

Press the





button to select CMM, CFM (for Airflow Volume

mode) or m/s, ft/min, km/h, mile/h, knots (for Air Speed mode).

When your choice flashes, press the MODE SET button to store it.

Press the





button to select m/s, ft/min, km/h, mile/h or knots.

When your choice flashes, press the MODE SET button to store it.

Press the





button to select CMM or CFM. When your choice

flashes, press the MODE SET button to store it.

Press the





button to select °F or °C. When your choice

flashes, press the MODE SET button to store it.

Use the button to toggle between the minutes and seconds fields of

the time shown on the secondary readout. Use the



and



buttons

(holding them, if convenient) to adjust the flashing value within each

field. The sampling time can be set to any value between 5 seconds

(00:00:05) and 59 minutes, 59 seconds (00:59:59). After entering the

desired sampling time, press the MODE SET button to store it.

TempIR

Press the button to clear the meter’s internal data logging memory.

Doing so resets the five-digit Memory Space counter and causes it

and the text CLR-Memory above it to flash, confirming the erasure.

After six seconds, the meter will automatically exit the Advanced

Settings Menu and enter normal measuring mode.

TempIR

Use the button to toggle between the year, month and day fields of

the date shown on the secondary readout. Use the



and



buttons

(holding them, if convenient) to adjust the flashing value within each

field. After entering the current date, press the MODE SET button to

store it.

TempIR

Use the button to toggle between the hours, minutes and seconds

fields of the time shown on the secondary readout. Use the



and



buttons (holding them, if convenient) to adjust the flashing value

within each field. Remember to use the 24-hour format when setting

the hour. After entering the current time, press the MODE SET button

to store it.

TempIR

Press (and hold, if convenient) the





button to adjust the value

on the primary readout to the measured area. The area can be

adjusted from 0.01 to 322.92 ft

in increments of 0.01 ft

, or from

0.001 to 30m

in increments of 0.001 m

. After entering the correct

area, press the MODE SET button to store it.

MODE

SET

CIH20DL-FINAL-122111_awb 12/21/11 9:58 AM Page 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Komentarze do niniejszej Instrukcji

Brak uwag

General-tools-and-instruments CIH20DL Instrukcja Użytkownika Strona 13

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Narzędzia General-tools-and-instruments CIH20DL