General-tools-and-instruments LRTH185DL Instrukcja Użytkownika Strona 1

HB2TM1850001 Temperature/Humidity Monitor User’s Manual

9 6 LED description 1. Temperature reading value 2. Humidity reading value 3. Time reading value 4. Time unit 5. Data logger symbol 6. Temperatu

107 Clock and Date setup  Push “ ” button into time clock and date setup.  Push “”button to select option to adjust  Push “”or “ ” button to

118 Alarm Range Setup  Push “ ” button into alarm setup LED will display ALARM ON。If you just reading alarm setup please push “” button again LED

12 If test Temperature or Humidity exceed set range, the buzzer will beep, at this time socket output sin wave signal at 2000Hz terminal blocks wi

139 Battery replacement  Turn off the instrument.  Open the battery cover and remove the battery.  Replace with one-9V NEDA 1604, IEC 6F22 o

1410 External DC Power  External AC to DC adapter: Voltage 9VDC(8~14VDCMax)  Socket：pin Positive, Ground Casing External  Diameter 0.22”(5.5m

1512 Software installation  Please put the CD in the PC that will be connected to this meter.  Please select the USB driver that will be in

16 Select the SETUP.EXE i.e., E:\TM-185D\SETUP.EXE and installs the desktop icon  Tack out the CD from PC after completed the installation of t

17 Use the USB cable to connect the meter and computer according to the drawing.  Select the desktop icon and click twice on left key of the mo

1813 Maintenance  Do not use the meter in an environment with severe change; do not store the unit in an environment with high temperature, high hu

1 Table of Contents 1 PREFACE... 2 2 CHARACTERISTICS ...

1914 End of life Caution: this symbol indicates that equipment and its accessories shall be subject to a separate collection and correct disposal

2016 Single data memory  Push Record button each time to store the display reading and memory location in memory. 17 Viewing logged Data  Push

21 PREFACE Thank you for your purchase. Please read the operation instructions in detail before you use this meter, so that it may operate correc

33 General Specifications  Display: Double row LED, humidity MAX reading 999,and temperature MAX reading 1999.  Temperature sensor: Diod

4 Size:10.2” x 7” x 1.9”(260x178x47mm)（LxWxH）.  Weight: 35.3oz (1000g).  Operating Temperature and Humidity: -4 to 140°F (-20 to 60°C), <95%

54 Electrical Specification  Measurement Range: Humidity: 5% to 95%. Temperature: -4.0°F to 140.0°F /-20.0°C～60.0°C .  Temperature Accuracy:±1.8

6

75 Instrument description

81. Temperature & Humidity sensor 2. Time Set Button 3. Alarm Set Button 4. °C /°F Set Button/Down Button 5. Enter Button 6. Hold Button/UP